The BlueMaster AdBlue® storage and dispensing tanks have been specifically designed for the secure dispensing, management, and protection of AdBlue®. Manufactured with a double skin and fitted with an intelligent Tank Monitoring System (TMS), the BlueMaster AdBlue® Tank offers a long-term practical solution to liquid storage management.
| Capacity (l/gal) | Length (mm) | Width (mm) | Height (mm) |
| 2500 / 550 | 2469 | 1460 | 1950 |
| 5000 / 110 (Vertical) | 2850 | 2250 | 2350 |
| 5000 / 1100 (Slimline) | 3900 | 1150 | 2340 |
| 9000 / 1980 | 3280 | 2480 | 2950 |
Dimensions may vary within a small parameter due to manufacturing process variations or environmental conditions.
| Description / Capacity | Terminal | Standard | Advanced | PRO |
| Double Skinned Tank | ● | ● | ● | ● |
| Submersible Pump | ● | ● | ● | ● |
| 2" Stainless Steel Dry Coupling Connection | ● | ● | ● | ● |
| Kingspan TMS | ● | ● | ||
| 1” Stainless Steel Ball Valve terminated connection | ● | |||
| Prepared for Kingspan WAP Telemetry | ● | ● | ● | ● |
| Hydrostatic Level Gauge | ● | |||
| Automatic Dispensing Nozzle | ● | |||
| Manual Pump Switch | ● | |||
| 3/4” EPDM Delivery Hose (6m on 2500L and 8m on 5000L Vertical & Slimline and 9000L) | ● | ● | ● | |
| Piusi Automatic Dispensing Nozzle with nozzle holder pump switch | ● | ● | ||
| Flowmeter | ● | ● | ||
| Light in Housing | ○ | ● | ||
| Watchman Access Tank Managment System - Starter pack inc. 40 RFID Cards, 40 RFID Key Fobs and RFID Card Reader | ● | |||
| Tank fitted with Kingspan WAP Telemetry | ○ | ○ | ○ | ○ |
| Elaflex ZVA Automatic Dispensing Nozzle | ○ | ○ | ○ | |
| Elaflex LV ZVA Automatic Dispensing Nozzle | ○ | ○ | ○ | |
| Hose Reel (not available on 2500L) | ○ | ○ | ○ | |
| Inline Flowmeter | ○ | |||
| Pack of 10 RFID Cards & Key Fobs | ○ | |||
| Roaming SIM Card*** | ○ |
● = Standard accessories ○ = Optional accessories
Our BlueMaster Terminal tank range has been designed to be incorporated into existing stand-alone dispensing and fuel management systems.
The BlueMaster Standard Tank specification is an entry-level dispensing system with quality and functionality in mind.
Manufactured with a double skin and fitted with an intelligent Tank Monitoring System (TMS), the BlueMaster Advanced AdBlue® Tank offers a long-term practical solution to liquid storage management.
The BlueMaster PRO AdBlue® storage solution, our highest specification of dispensing tank complete with the Watchman Access advanced fleet management system.
While AdBlue is not classified as a hazardous material (67/548/EEC), care should be taken when transporting Adblue due to it’s corrosive properties and reactions to certain compounds and materials such as mild steel, copper or aluminium as well as calcium and sodium hypochlorite.
Consider a dedicated transportation and dispensing tank such as BlueTruckMaster as a portable solution.
AdBlue is a corrosive material and must not be added to the fuel tank. Damage can be caused to the tank and corresponding pipework if mixed. If in the unlikely event AdBlue is accidentally added to a fuel tank seek professional help to drain and flush the AdBlue solution from fuel tank.
AdBlue can be stored outside in a dedicated sealed tank, within a temperature range between 0°C and 30°C, and away from direct sunlight.
AdBlue is a liquid solution of urea. When it meets a hot exhaust system it releases ammonia which is a catalyst to a chemical reaction that converts dangerous Nitrogen Oxides into two harmless products – water vapour and Nitrogen.
Unloading must be carried out with the use of specialized equipment, such as a forklift or crane, slings and belts. To anchor slings, use special fastening points. It is important to make sure that the forks are sufficiently long. Sliding or rolling the tanks is prohibited. Never use projecting parts when lifting or sliding the tanks. Do not place any burdens on walls and roof.
AdBlue can crystalise in the nozzle. You can clean the nozzle by rinsing it with clean, warm water.
The tank is delivered without power supply line. A qualified engineer should connect a suitable 230V power line to junction box in the tank cabinet.
For BlueMasters with pumping equipment inside a cabinet, a hole must be drilled in the sidewall of the cabinet to connect the product to an external power source. It is essential that a grommet/gland be used in the sidewall to prevent water ingress into the cabinet and that the hole is located above the lowest edge of the door opening.
230V pumps are self-priming pumps and should not require priming. If the pump fails to prime, please contact our customer service team.
Get in touch for more information on how we can help you with your project
Kingspan Service
As Service & Support specialists, we provide complete care to keep your fuel storage and dispensing tanks performing at their best.
Smart Monitoring
Monitor, manage, and optimise performance in real time with our advanced range of telemetry solutions. Our smart monitoring systems keep you connected to your Titan product - delivering instant insights, early alerts, and peace of mind from any location.
Resources
From real-world projects to useful industry knowledge, explore our latest case studies and articles. Gain insight into different applications and keep up to date with the latest developments, ideas and information from across the industry.
John Deere needed to upgrade old and corroded fuel tanks at its head office in Illinois.
HVO is also known as biofuel, green diesel, and renewable diesel. It’s a plant-based, premium-quality fuel made from fossil-free, certified and sustainable raw materials.
On-site bulk storage is a convenient way to handle diesel and meant Wup Doodle could buy larger volumes of diesel
This article explores the compelling reasons why choosing Titan for storage tanks is a wise decision.
